FNIRSI DSO-TC2 Handheld Digital Oscilloscope LCR Meter Graphic Display Transistor Tester 2.4-inch TFT Color Screen LED Backlight for Auto Repair Appliance Repair Standard

260

lenox 175 Digital Multimeters & Oscilloscope

FNIRSI DSO-TC2 Handheld Digital Oscilloscope LCR Meter Graphic Display Transistor Tester 2.4-inch TFT Color Screen LED Backlight for Auto Repair Appliance Repair Standard

Banggood

72.49 ~~152.22~~

See Deal

FNIRSI DSO-TC2 Handheld Digital Oscilloscope LCR Meter Graphic Display Transistor Tester 2.4-inch TFT Color Screen LED Backlight for Auto Repair Appliance Repair Standard

72.49 ~~152.22~~

See Deal

>>Please click here to download the English manual<<
Description:
FNIRSITC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with largesize color dot matrix TFT display.Builtin rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.
FNIRSITC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Press the ‘Up’ and ‘Down’ keys of the direction keys to select,Select ‘Mos Test’ item, press’OK’key to enter component tester mode;Select the ‘Oscilloscope’ item, press’OK’key to enter the oscilloscope mode
‘Mos Test’ mode can test various types of transistors, and can identify device type, pin polarity, hFE, turnon voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.
FNIRSITC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.
‘Oscilloscope’ mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yourself and complete the upgrade.
It is hoped that FNIRSITC2 can make the study and work of the majority of users more efficient and interesting.
Technical Parameter:
FNIRSI DSOTC2 Equipment Parameters:
Display:2.4 inch TFT color screen, LED backlight
Powered by:1500mAh rechargeable lithium battery
Charging:USB TypeC, +5V
Size:79 x 31 x 103mm (L x W x H)
Bracket:Hidden Support fram
Specifications Of Oscilloscope Mode:
The oscilloscope has a realtime sampling rate of 2.5MS/s and a 200kHz bandwidth
With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analog signals and aperiodic digital signals
Up to 卤400V voltage signal can be measured
Equipped with efficient onekey AUTO, the measured waveform can be displayed without cumbersome adjustment
Selfcontained 80kHz /5.0V PWM wave test signal source with adjustable duty cycle

Realtime sample rate	2.5MS/S
Analog bandwidth	0200kHz
Input resistance	1M惟
Coupling	AC/DC
Test voltage range	1:1 probe:80Vpp (卤40V)
10:1 probe:800Vpp (卤400V)
Vertical sensitivity	10mV/Div 10V/Div (in 125 increments)
Vertical displacement	Adjustable, with indication
Horizontal time base range	10us/Div 500s/Div (in 125 increments)
Trigger mode	Automatic, Regular and Single
Trigger type	Rising edge, falling edge
Trigger level	Adjustable, with indication
Waveform freeze	Yes (HOLD function)
Automatic measurement	Maximum, minimum, average, rms, peaktopeak, frequency, period, duty cycle
PWM output	FRQ:080KHz, Duty cycle:0~100%, Amplitude:5.0V

Technical Parameters Of Transistor:
This instrument can automatically identify and measure various transistors.Including NPN and PNP transistors, Nchannel and Pchannel field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc.,and passive components such as resistors, inductors, capacitors, etc.
Automatic detection of pin definitions
It can automatically parse the infrared code of the NEC protocol
Other functional modes:including circuit continuity test, 0~16V input voltage measurement, PWM output, 0~24V Zener diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.

Category	Scope	Technical Parameter
Triode	*	Magnification hfe, baseemitter voltage Ube, Ic/le, collectoremitter reverse cutoff current Iceo, Ices, protection diode forward voltage drop Uf 鈶?br/>
Diode	Forward voltage drop<5V	Forward Voltage Drop, Junction Capacitance,Reverse Leakage Current鈶?br/>
Zener diode	0.01 4.5V	(123 test area) forward voltage drop, reverse breakdown voltage
0.01 24V	(KAA test area) reverse breakdown voltage
FET鈶?br/>	J FET	Gate capacitance Cg, drain current Id at Vgs, protection diode forward voltage drop Uf 鈶?br/>
IGBT	Drain current Id at Vgs, protection diode forward voltage drop Uf鈶?br/>
MOSFET	Turnon voltage Vt, gate capacitance Cg, drainsource resistance, protection diode forward voltage drop Uf鈶?br/>